I was wandering if there is a easy way to force clients to specific radios on a aironet 1250. For example, I like to make the 802.11n clients use the 5Ghz and the non 802.11n clients use the 2.5Ghz radio.
The only way you can do that now is on the client side. For 802.11N, you will bond two 20 MHz channels only on the 5GHz side. So clients that support 802.11N and the 5GHz should prefer the 5GHz than the 2.4GHz. But it will not stop client to use the 5GHz band which I think you are trying to accomplish.
You can always seperate the clients by ssid and only allow certain bands.... like create an 802.11N ssid for only 802.11N devices and a 802.11bg ssid for all others.
*****Help out other by using the rating system and marking answered questions as "Answered"*****
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...