Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

G to A traffic

hello experts!!!

can traffic pass through 11g to 11a and vice versa. please have a look at the attached drawing and see if any of you can share any practical solution.

the idea was to use the APs as repeaters on the three trucks and not to use bridges at all.

i don't have the supposed type of AP so I can not physically confirmed this kind of setup.

thanks very much....

3 REPLIES
New Member

Re: G to A traffic

is this setup even possible?

btw, the trucks will be mobile all together, most of the time, and all four trucks will be within the range of not more than 300m.

Re: G to A traffic

Sounds like a nice plan. One thing I would suggest in that, is to use the G radio for client connectivity, and use the A radio for the brdige connection. Mostly due to the fact that the A radio in a laptop will be a bigger draw on the battery. If this is not a concern, then whatever actually tests best for you.

You should be able to do this. You would set an infrastructure SSID on the bridge side to get the non-root bridges, to join to the root bridge, then on the other radio, have a "normal" SSID, that the clients associate to.

Now for 300M, you would probably be better suited to use the G radio, since the A radio has a lesser distance, but if you push the transmit power to the max on that radio, you might cover at that distance. Also if you use the A radio as the backhaul, you are less likely to get interferance on it.

Just my 2cents.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: G to A traffic

hi steprodr!

thanks for your reply. it will try this. i really need to get my hands on the AP with tour suggestion. i would like to try G for the outdoor and A for the indoor.

however, if i set the role of the APs to bridge modes (1 root and the rest non-root), would the .11a clients be able to associate? i remember having the option 'non-root with clients" back in the 350s, will this option suffice it? is this option still available with the 1200s? i have here with me now a 1300 and this option is NOT available. can a client placed in between point-to-point devices (either 1200 or a 1300) associate?

thanks for your time....:)

108
Views
4
Helpful
3
Replies
CreatePlease login to create content