I set up wireless networks in feedyards using the Aironet 1300 as a Work Group Bridge. Typically the bridge is setup out in the middle of the feedyard to broadcast an SSID, with an Omni Directional antenna. We mount a patch antenna on the office and have it connect to the SSID using a Buffalo Ethernet converter. My question is, if the office has internet, how can I get the internet out in the feedyard. Yes the computers on the office network do have internet and can communicate with the pc's out in the feedyard. Any help would be greatly appreciated. Thanks.
Re: Gaining Internet access through an Aironet 1300
if we are using 1300 WGB and we have same SSID on the "root" side i.e. your office, then users connected to this WGB should be able to access internet. Are we using same SSID on both sides for internet access? Are we using any VLAN? Is there any security setting we are using on WGB or on our root AP?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...