Getting a 1131AP to join a controller in a different Mobility Group...
I have a situation where I have three WiSM's or 6 controllers. The last WiSM we installed I have configured with a different mobility group due to the rev. of code that is on the new one. The new one is at 18.104.22.168 and the old ones are at 22.214.171.124. Since the old controllers randomly reboot, I didn't want to put a new controller that would require an upgrade to the AP in the same group. Since I have over 350 AP's, this could take down most of my wireless network.
My question is how can I get an AP from the first mobility group to join a controller in the second mobility group? I am using DNS to get the AP's to the controllers, not DHCP option 43. Is there a way to do this?
Re: Getting a 1131AP to join a controller in a different Mobilit
Every AP will be having an option of primary,secondary and teritary controller.
So click on the AP which you want to move to different controller on different mobility group and configure that controller system name into primary controller option in that AP and Apply the settings and then reset the AP.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...