06-07-2007 11:33 AM - edited 07-03-2021 02:10 PM
All, Im having an issue trying to get my second SSID to work. I can pass traffic just fine with my SSID#1 (get to servers, internet, etc), but I cant do anything with the second SSID#2 I setup. Can you guys see anything I have done wrong? Id appreciate the insight. Thanks.
show run
Building configuration...
Current configuration : 2807 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
clock timezone S -6
clock summer-time S recurring
ip subnet-zero
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid SSID#2
vlan 2
authentication open
guest-mode
!
ssid SSID#1
vlan 1
authentication open
infrastructure-ssid optional
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 2312
station-role root
no dot11 extension aironet
no cdp enable
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
!
interface BVI1
ip address (internal vlan 1 address) 255.255.255.0
no ip route-cache
!
ip default-gateway (vlan 1 default gateway)
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
bridge 1 route ip
!
!
line con 0
line vty 0 4
login local
line vty 5 15
login
!
end
06-13-2007 11:07 AM
In the WLAN SSID field, enter the network name or service set identifier (SSID). This is the default SSID that the access points use when they join a controller.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide