Looking for a good commercial (not homemade) solution to reflect signals around obstructions. I do not have point to point line of sight, but have a third location that does have LOS to each site.Planning to use BR350s at each site.
Placing a bridge at the third location is a good solution but remember that cuts the bandwidth in half.
If that's not an option place two bridges at the third location linked together by a crossover. Then configure two links from that third place with a diferent SSID and channel. This way you will have a better throughput
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...