Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Guest access to open SSID, enter email address and accept AUP

Hi,

Could someone please tell me if the WLC support this senario.  Guest user associates to an open SSID, get's redirected to captive portal page where they are prompt to enter their email address, and then accpet AUP, and allowed Internet Access?  Can this be done on either the WLC itself or with ISE?  If not, what's the closest work flow that can be done?

,Angel

4 REPLIES
Hall of Fame Super Silver

Guest access to open SSID, enter email address and accept AUP

This can be done on the WLC, but the email address isn't really verified and also the email can be collected from the logs only.  Here is a screen shot of where you can configure the email from the WLAN

1-28-2014 5-06-22 PM.jpg

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Guest access to open SSID, enter email address and accept AU

Here is a link also:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080bf7d89.shtml#passthrough

ISE can give you a better work flow, but its not cheap.  With ISE you can have a sponsor or even self registration, but with the WLC itself, your limited to passthrough, passthrough with email or webauth.

Thanks,


Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

Guest access to open SSID, enter email address and accept AUP

Thanks Scott, I'll have to try this. 

,Angel

Hall of Fame Super Silver

Guest access to open SSID, enter email address and accept AUP

No problem.... should be pretty straight forward.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
287
Views
0
Helpful
4
Replies
CreatePlease login to create content