Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Guest User Password

Hai all,

who have experience about Lobby Ambasador on WLC?

after Lobby Ambassador create/generate account for Guest User, can we print out each Guest User Account? so we can give the hardcopy about they wireless account.

all, please advice..

thanks

Everyone's tags (5)
3 REPLIES

Guest User Password

Hi,

printing of guest accounts is only included in WCS/NCS, not in the WLC itself.

regards

Stefan

New Member

Guest User Password

Hai Stefan,

thanks for info, so we can't just using WLC for that feature ?

others question are :

- so if we have WCS or NCS, we only create Lobby Ambassador account on WCS/NCS right? we don't need to create lobby ambassador on WLC ?

-

1R-PI-1.1-K9Cisco Prime   Infrastructure 1.11
2R-PI-1.1-100-K9Prime Infrastructure   1.1 Software - 100 Device Base Lic1
3L-PILMS42-100Prime Infrastructure   LMS 4.2 - 100 Device Base Lic1
4L-PINCS11-100Prime Infrastructure   NCS 1.1 - 100 Device Base Lic1
5L-PINCSW11-100Prime Infrastructure   NCS WAN 1.1 - 100 Device Base Lic1
6CON-SAU-PI11100SW APP SUPP + UPGR   PI 1.1 Software - 100 Device Base Lic1

Above is BoQ for Cisco Prime, can do Printing feature with that BoQ?

regards,

leonardus

Guest User Password

Hi Leonardus,

you cannot print guest accounts directly from a WLC, so if you have a NCS available I would recommend to do it there.

And right, you only need to setup the lobby ambassador accounts on NCS, not on the WLC as well - NCS will push the guest user credentials via SNMP to the controller(s).

Please also check the configuration guide if NCS fulfills all your requirements:

http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/manag.html#wp1246090

regards

Stefan

1535
Views
0
Helpful
3
Replies
CreatePlease to create content