Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be:
* WLC 5508-50 in the main Site
* 03 Remotes Sites : (5) AP 1141 each/site
* WAN Remote: MPLS-VPN Bw:1024, RTT< 20ms (From the main site)
I concern how it would be the performance, so
Have Somebody had some similar experience with H-REAP? or Any other H-REAP deployment with more than 3 AP in the remote Sites ?
Thanks for any comment.
Hi with a latest Release 6.0 in a 5508 are supported 20 H-reap Group with a 25 AP without problem.
I have tested a solution with a WLC in a remote site and work OK.
In a latest Release 6.0 a WLC 5508 support 20 H-Reap group with 25 AP whitout problem
I have tested it with a WLC installed in remote site and work OK.
How many AP do you have in your remote site? and what is the BW ?
You should be fine with your setup. I have multiple clients running H-REAP. One client with 25 sites and from 2-5 1250's in H-REAP. Also have schools with remothe sites 30+ H-REAP. You ping times are reasonable for this type of install.