Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

H-Reap vlan mapping groups

Hi

Im configuring a WLC 5508 ( version 7 ) with h-reap local switching.

All is working , yet i wonder if the vlan mapping can be done better.

Currently i need to go into each Lightweight Access point , enable h-reap, then set the native vlan , with the final step to map the vlan. This needs to be done for each AP. In an environment of 100's of APs i would take foreever. ( i thought one of the main points of the WLC is centralized management )

Am i missing something ? Is there an easier way to do this ?

Cheers, Pankaj

Everyone's tags (5)
1 REPLY

H-Reap vlan mapping groups

you should be able to set the VLAN mappings from WCS/NCS as well.

as well in 7.2 you can now do dynamic vlan assignment, though you still need to list the VLAN the HREAP can access

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1247954

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1019
Views
0
Helpful
1
Replies
CreatePlease to create content