Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

H-REAP

When I configuring APs with H-REAP with multiple VLANs. Do I have to trunk the APs LAN interface and Switchport?

4 REPLIES

Re: H-REAP

Yes, ports are in trunk mode.

Hope it helps

Jerome

Re: H-REAP

let me take that one step further. You can use a trunk or access ports for AP connectivity. The LWAPP tunnel will cross over either. I have deployed these over a MPLS network over switch port.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

H-REAP

whatv vlans we should allow in trunk port ?

in my scenario, we have MPLS network in between.

Pls. explain if possible. Thanks !

Hall of Fame Super Silver

Re: H-REAP

For an H-REAP AP, you need to trunk only the vlan your ap management ip address is on and any of your vlans you wish to put wireless users on (local switching). If you are centrally switching any SSID's, you do not need to add those vlans to the trunk port.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
524
Views
4
Helpful
4
Replies