Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Help please with Aironet 1200 (AP1220B)

Hello,

I need help with a 1200 series Aironet. When doing a SH IP INT BRIEF it is showing RESET on the Dot1Radio0 interface.

Dot11Radio0 Status reset

What does this mean? and how to I initiate this interface? is it because I do not have the extended radio antenna plugged in?

Thanks in advance.

Interface IP-Address OK? Method Status Protocol

BVI1 10.188.100.6 YES NVRAM down down

Dot11Radio0 unassigned YES NVRAM reset down

FastEthernet0 unassigned YES NVRAM up down

**EDIT**

I have consoled into the second WAP with IP 10.188.100.5 and it is not showing this problem.

Could it be that 10.188.100.6 has a damaged or malfunctioning radio antenna?

1 REPLY
New Member

Re: Help please with Aironet 1200 (AP1220B)

Hi!

Please check the station role; it should be Root or Access point on the AP and SSID is enabled on the radio.

If SSID is configured and role is set as desired, do a hard reset on the AP and see if it helps.

Check the LED status as well. Review the link for LED indication:

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43trb.html#wp1076792

HTH

-Jai

337
Views
0
Helpful
1
Replies
CreatePlease to create content