I have 2 radios in 2 different vehicles, static IP's.
1 is a Aironet 350 Series and the other is a 1240 Series. If i make the 1240 Series Root and the 350 Series a non-root, the radios cannot see each other. If i make the 350 Sereis Root and the 1240 Series non-root they can see each other.
I really need to have the 1240 series root due to logistics and other radios in the whole network.
(None of the other radios are on when this problem happens.)
Honestly, I've always been told by Cisco that different bridge models cannot talk to each other. If you're gotten it to work with the 1240 as the non-root, that might only be because the 350 doesn't contain that restriction as the root.
So yeah, I'm pretty sure Cisco makes the devices incompatible. :/
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...