Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How Are Your Controllers Setup for BYOD/Guest and OEA

I am in the process of building a new wireless network. The network will include BYOD/Guest and OEA for teleworkers using ICE and MobileIron for MDM. In the past I have setup an anchor controller for guest, but for this design I have a cost constraint that prevents me from adding the anchor controller. I know the Cisco SE’s push to include an anchor controller in the DMZ for this design, but I wanted an unbiased opinion from folks who may have a similar design and how your controllers are setup. For this design can I deploy a BYOD/Guest and OEA network without a DMZ controller?

Thanks in advance.

Bret

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

How Are Your Controllers Setup for BYOD/Guest and OEA

2 REPLIES
VIP Purple

How Are Your Controllers Setup for BYOD/Guest and OEA

Bronze

Re: How Are Your Controllers Setup for BYOD/Guest and OEA

I think you just need to specify the local controller as the anchor for the wlan.
The tunnel will end here and data is passed on to a dynamic interface ( vlan)

Ju will miss the extra security of passing data to a network segment separated by firewall.

Sent from Cisco Technical Support iPad App

356
Views
5
Helpful
2
Replies
CreatePlease login to create content