Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How many simultaneous SSID ?

How many simultaneous SSID can I configure on Cisco AIR-BR1310G ?

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: How many simultaneous SSID ?

Hi Roberto,

You can configure up to 16 SSIDs on your access point/bridge and assign different configuration settings to each SSID. All the SSIDs are active at the same time; that is, client devices can associate to the access point/bridge using any of the SSIDs. These are the settings you can assign to each SSID:

•VLAN

•Client authentication method

--------------------------------------------------------------------------------

Note For detailed information on client authentication types, see "Configuring Authentication Types."

--------------------------------------------------------------------------------

•Maximum number of client associations using the SSID

•RADIUS accounting for traffic using the SSID

•Guest mode

•Repeater mode, including authentication username and password

•Redirection of packets received from client devices

http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_4_JA/configuration/guide/o13ssid.html#wp1002608

Hope this helps!

Rob

2 REPLIES
New Member

Re: How many simultaneous SSID ?

Not sure about the BR1310G, however I believe that the limit is 8 SSID's per AP. I have personally done 4 on a 1131G, but am not sure about the 1310G.

Hall of Fame Super Red

Re: How many simultaneous SSID ?

Hi Roberto,

You can configure up to 16 SSIDs on your access point/bridge and assign different configuration settings to each SSID. All the SSIDs are active at the same time; that is, client devices can associate to the access point/bridge using any of the SSIDs. These are the settings you can assign to each SSID:

•VLAN

•Client authentication method

--------------------------------------------------------------------------------

Note For detailed information on client authentication types, see "Configuring Authentication Types."

--------------------------------------------------------------------------------

•Maximum number of client associations using the SSID

•RADIUS accounting for traffic using the SSID

•Guest mode

•Repeater mode, including authentication username and password

•Redirection of packets received from client devices

http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_4_JA/configuration/guide/o13ssid.html#wp1002608

Hope this helps!

Rob

200
Views
0
Helpful
2
Replies
CreatePlease to create content