How to add an AP to AP Group on redundant controller?

[djones]

I have AP Groups configured and working fine on my primary WLC. I can find no way to add APs to the AP Groups that I have defined on my redundant WLCs.(short of associating the APs to each of the redundant controllers, adding the APs to the AP groups etc.)

1 X Primary = WLC 4404 v4.0.206

3 X Redundant = WLC 4102 v3.2.193.5

[sbilgi]

Before you configure the AP Group VLANs feature, you must configure the WLC for basic operation and register the LAPs to the WLC. Refer URL

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml#c2

[jakew]

The AP Group Name assigned to an AP is one of the config parameters the AP stores locally in NVRAM and carries with it to a new controller. So, as long as the AP Group Name is the same on the redundant WLCs as it is on the primary, you're golden.

[djones]

Thanks, I will test this next maint. period. Another thing to add to the documentation :>)