Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to configure AIR-WLC4402-50-K9 in cluster

Hi dear,

Could you please give me some clues how to configure AIR-WLC4402-50-K9 in cluster.

Thanks in advance

Best Regards

3 REPLIES
Hall of Fame Super Silver

Re: How to configure AIR-WLC4402-50-K9 in cluster

Explain what you are trying to acomplish. Do you mean like in a server environment behind load-balancers?

-Scott
*** Please rate helpful posts ***
New Member

Re: How to configure AIR-WLC4402-50-K9 in cluster

Hi,

I mean, i want to use the first controller as a primary and the second controller as a secondary..If the primary goes down, the secondary take the role.

Thanks

Hall of Fame Super Silver

Re: How to configure AIR-WLC4402-50-K9 in cluster

Basically you configure the ap's to point to the primary, secondary and or tertiary controller. What you can do also is put half of your ap's on one wlc and the other half on the second wlc. Then configure the secondary wlc as the other wlc. You must make sure you also configure the mobility groups which is required.

This doc might help:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00809817ca.shtml

-Scott
*** Please rate helpful posts ***
259
Views
0
Helpful
3
Replies