Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to configure cisco 3702 via console to join controller

How to configure cisco 3702 via console to join controller

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi As long as 3702 has an IP

Hi 

As long as 3702 has an IP reachable to your WLC, you can type one of the below commands & it will find WLC & register

3702#capwap ap controller ip address <WLC_Mgt_IPAddress>

OR

3702#capwap ap primary-base <WLC_Name> <WLC_Mgt_IPAddress>

Some of the other useful CLI commands used in this post. refer that for more detail

http://mrncciew.com/2013/03/17/ap-registration/

 

HTH

Rasika

**** Pls rate all useful responses ****

1 REPLY
VIP Purple

Hi As long as 3702 has an IP

Hi 

As long as 3702 has an IP reachable to your WLC, you can type one of the below commands & it will find WLC & register

3702#capwap ap controller ip address <WLC_Mgt_IPAddress>

OR

3702#capwap ap primary-base <WLC_Name> <WLC_Mgt_IPAddress>

Some of the other useful CLI commands used in this post. refer that for more detail

http://mrncciew.com/2013/03/17/ap-registration/

 

HTH

Rasika

**** Pls rate all useful responses ****

3675
Views
0
Helpful
1
Replies
CreatePlease to create content