08-11-2009 04:47 PM - edited 07-03-2021 05:56 PM
Hi,
am looking for documentation on how to configuring QOS for sip phones and Qos on 3560 switches for the sip phones
thanks
08-12-2009 04:36 PM
Here you go:
Enterprise QoS Solution Reference Network Design Guide
Campus QoS Design
Catalyst 2970/3560/3750-QoS Considerations and Design
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoSDesign.html#wp999395
08-12-2009 05:27 PM
Thanks for the link,
I have 100 lwap access points connected to the 3560 switches and new sip phones are going to be used on the wireless network, my question is do I need to just configure the switches that AP's are connected to with QOS or there are additional things I need to do. to complet the qos aspect of it.
Thanks
08-12-2009 05:36 PM
Here is the LWAPP QoS config guide. This should answer your question.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807e9717.shtml
08-12-2009 11:56 PM
Thank you, very good link for what I was looking for.
08-12-2009 05:37 PM
This is addressed within the Voice over WLAN Design Guide. I would recommend reading this entire chapter so you fully understand the "art" that is wireless QoS.
Voice over Wireless LAN 4.1 Design Guide
WLAN Quality of Service
IEEE 802.11e, IEEE 802.1P, and DSCP Mapping
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan_ch2.html#wp1046206
08-13-2009 12:04 AM
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: