11-28-2013 08:43 AM - edited 07-04-2021 01:20 AM
Hi does anybody know what is the default ip adress for to enter the configuration web page of the access point
air sap 1602?
how do i configure it?
I just plug it to my router and would like to configure it so it can be usable and recognised in my network
thanks
11-29-2013 04:48 AM
Use a console cable and connect it to the AP. Default IP is 10.0.0.1 I believe unless it gets an IP address from dhcp.
Sent from Cisco Technical Support iPhone App
11-29-2013 09:55 AM
Connect a console cable & get "show ip interface brief" output. That should tells you what is the IP assigned to your AP (BVI interface).
If your router gives DHCP & you just want to configure it for a SSID with pre-shared key, you can try some configuration like this.
hostname
!
dot11 ssid
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii
!
interface Dot11Radio0
encryption mode ciphers aes-ccm
ssid
no shutdown
!
interface Dot11Radio1
encryption mode ciphers aes-ccm
ssid
no shutdown
!
interface BVI1
ip address dhcp
HTH
Rasika
**** Pls rate all useful responses *****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide