Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to configure wireless air sap 1602?default ip adress?

Hi does anybody know what is the default ip adress for to enter the configuration web page of the access point

air sap 1602?

how do i configure it?

I just plug it to my router and would like to configure it so it can be usable and recognised in my network

thanks

2 REPLIES
Hall of Fame Super Silver

Re: how to configure wireless air sap 1602?default ip adress?

Use a console cable and connect it to the AP. Default IP is 10.0.0.1 I believe unless it gets an IP address from dhcp.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Re: how to configure wireless air sap 1602?default ip adress?

Connect a console cable & get "show ip interface brief" output. That should tells you what is the IP assigned to your AP (BVI interface).

If your router gives DHCP & you just want to configure it for a SSID with pre-shared key, you can try some configuration like this.

hostname

!

dot11 ssid

   authentication open

   authentication key-management wpa version 2

   guest-mode

   wpa-psk ascii

!

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid

no shutdown

!

interface Dot11Radio1

encryption mode ciphers aes-ccm

ssid

no shutdown

!

interface BVI1

ip address dhcp

HTH

Rasika

**** Pls rate all useful responses *****

2041
Views
0
Helpful
2
Replies
CreatePlease to create content