Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to convert a AP1200 into a NON-ROOT BRIDGE?

Hello. I'm looking for "best practice" documentation on how to setup a AP1200 into a "non-root bridge".

If possible, please provide links to assist. Thanks in advance for your help. Cheers!

3 REPLIES
Hall of Fame Super Red

Re: how to convert a AP1200 into a NON-ROOT BRIDGE?

Hi Nick,

Have you checked out this doc:

Access Point as a Workgroup Bridge Configuration Example

Here is the link:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

Please remember to rate helpful posts.........

New Member

Re: how to convert a AP1200 into a NON-ROOT BRIDGE?

Rob, I appreciate your assistance. However, I require information on configuration of a AP1200 as a "non-root bridge", not a workgroup bridge (WGB). Cheers!

Hall of Fame Super Red

Re: how to convert a AP1200 into a NON-ROOT BRIDGE?

Hi Nick,

Sorry about that! There is almost no documentation on converting a 1200 AP into a non-root bridge.Here is everything I could find that might help:

Configuring the Access Point for the First Time

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_guide_chapter09186a00804d2f2b.html

Configuring the Role in Radio Network

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00804e7d2f.html#wp1101651

Deployment Guide: Configuring the Cisco Wireless Security Suite

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a0080225228.html#wp1008175

You may want to contact your SE and see if they have any internal documentation that they can pass along.

Hope this helps!

Rob

310
Views
0
Helpful
3
Replies