How to determine endpoint bandwith utilization

[jedavis]

Hi,

I occasionally see large amounts of traffic saturating WAN links between a centrally located WLC and any one of several remote access points.  Most of the traffic on the remote APs is locally switched (flexconnect) but there are a couple of SSIDs that are centrally switched (e.g. guest).  My tools just show the traffic between the AP and the WLC. .How can I drill down and determine which endpoint is consuming that bandwidth?

Thanks,

-Jeff

[Rasika Nayanajith]

Hi Jeff

Probably you have to get WLC netflow data to see what traffic is it.

From WLC 7.4 code onward this feature supported & below post may give some reference

http://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

HTH

Rasika

**** Pls rate all useful responses ****