Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to fix Channel issue

Hi,

I am working on Cisco 1230 and 1240 series of access points with IOS

Version 12.3(8) JA2 and these access points showing channel 1 to

channel 13 but most of the chipsets doesn't support channel no 12,13.

How do i Negotiate these channel issue from channel 1 to 13, to

channel 1 to 11 in the cisco aironet devices.

what are the commands/options that we need to set in the devices so

that the won't propagate channel 12,13 any more.

looking forward for the advices at the earliest

Regards

Srihari

3 REPLIES
Green

Re: How to fix Channel issue

Check the country code of the AP. Change it to a country that doesn't use channels 12 & 13 (like the USA).

Good Luck

Scott

New Member

Re: How to fix Channel issue

Hi Scott, We actually tried the "world-mode dot11d country GB both" commands under the dot11radio0 interfaces, but it does not seem to have any impact.. Great britain i guess uses only channels 1-11.

New Member

Re: How to fix Channel issue

conf t

inter dot 0

channel least-congested 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462

or by gui:

network interface > settings. find the "Default Radio Channel Channel:" select: least-congested from the drop down menu. Mark the channel 1-11 (use ctrl+mouse)

Kind regards

Finn

178
Views
0
Helpful
3
Replies
CreatePlease to create content