Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How to upgrade an Aironet 3602e from Autonomous to Lightweight???

Hi everyone

Hope you can help me with this. I have an Aironet 3602e that was bought as a Lightweight AP, last week need to do some testing and changed the image to an Autonomous one. Now I need to use it with a Controller, but can´t find the procedure to upgrade it to Lightweight again.

I tried the procedure of the upgrade tool, but it saids that this AP is nos supported.

Anyone who has this information please. I already had the Lightweight images.

Best Regards

Alvaro Rugama

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

How to upgrade an Aironet 3602e from Autonomous to Lightweight??

HI Alvaro,

For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar

Regards

Hope it helps.

2 REPLIES
VIP Purple

How to upgrade an Aironet 3602e from Autonomous to Lightweight??

HI Alvaro,

For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar

Regards

Hope it helps.

Community Member

How to upgrade an Aironet 3602e from Autonomous to Lightweight??

Thank you very much sandeepchoudhary21

It is working right now

Best Regards.

Alvaro Rugama

888
Views
5
Helpful
2
Replies
CreatePlease to create content