Solved: How to upgrade WLSM

tracey.marshall · ‎04-04-2006

Does anyone know where I can find documentation on how to upgrade an WLSM?

Many thanks in advance,

Tracey

dominic.caron · ‎04-07-2006

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_configuration_guide09186a00802445fd.html

Step 1

Router# hw-module module mod reset

cf:1

Reboots the module from the maintenance partition.

Note It is normal to see messages such as "Press Key" on the module console after entering this command.

Step 2

Router# show module mod

Displays that the maintenance partition for the module has booted.

Step 3

Router# copy tftp: pclc#mod-fs:

Downloads the image.

Step 4

Router# hw-module module mod reset

Resets the module.

Step 5

Router# show module mod

Displays that the application partition for the module has booted.

View solution in original post

dominic.caron · ‎04-07-2006

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_configuration_guide09186a00802445fd.html

Step 1

Router# hw-module module mod reset

cf:1

Reboots the module from the maintenance partition.

Note It is normal to see messages such as "Press Key" on the module console after entering this command.

Step 2

Router# show module mod

Displays that the maintenance partition for the module has booted.

Step 3

Router# copy tftp: pclc#mod-fs:

Downloads the image.

Step 4

Router# hw-module module mod reset

Resets the module.

Step 5

Router# show module mod

Displays that the application partition for the module has booted.

tracey.marshall · ‎04-10-2006

Thanks so much for your help, Dominic.

Tobias Heisele · ‎05-03-2006

Does anyone know, how to upgrade two redundant WLSMs (Interchassis)? I want to upgrade the standby WLSM and switchover at night, but I don't know, if redundancy works with two different versions.

Any ideas?