cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1059
Views
0
Helpful
3
Replies

hreap vlan mapping issues

wlc 5508 code 7.0.220.0

AIR-CAP3502E-N-K9

ap mode: hreap

vlan mapping native 30

vlan ssid  x 310.

each time that for what ever reason my access point goes down(not that my access point resets by itself, if i have to move it), the setting in the vlan mapping  resets to  whatever my native vlan is, in this case 30

that is native vlan 30

ssid x vlan 30

any idea.

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

Do you have multiple WLC?  if you do, the WLAN's need to be in the same order.  If you have HREAP Groups configured, they need to match as well.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

on

just one controller just one ssid no hreap groups or ap groups

it could be

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtw92394&from=summary

but it is marked Unreproduceable.  You might try upgrading to the latest 7.2 code if you don't have 'legacy' AP.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: