Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HWIC-AP-AG-A issues in C1841

C1841 256 / 64

12.4(11)XJ or 12.4(11)XW8

Wireless HWIC reports "no valid power levels found"...

Doco says it's a supported module in 1841, but hw configurator does not list it as an option.

If I manually set OFDM power level to max, and force channel scan the intf comes up momentarily but then goes back into err/reset state.

Also, following appears in log.

%ALIGN-3-TRACE: -Traceback= 0x607B7AF8 0x607A6AB4 0x607A8298 0x607A8354 0x6072B058 0x60735CE4 0x60736084 0x0

*Jun 24 21:26:55.475: %ALIGN-3-TRACE: -Traceback= 0x607BE24C 0x607B7958 0x607B7F84 0x607A6AB4 0x607A8298 0x607A8354 0x6072B058 0x607

Module does not do this in 2811 chassis running same code revision.

I am trying a newer X revision of 12.4(11)XW8 to see if it resolves.

Feature set is AdvSecK9

1 REPLY
New Member

Re: HWIC-AP-AG-A issues in C1841

Update.

12.4(11)XW8 seems to resolve the issue with the card going into err-disable, and not finding power.

I will post an update after a few days of running.

Thanks,

BD

101
Views
0
Helpful
1
Replies