10-06-2005 12:26 AM - edited 07-04-2021 11:12 AM
Hi All,
I have 1100 series access point, where as it my clients are 802.11B. The clients are not detecting this network.
so what are the changes i need APs
Please help me out on this issue
Thanks,
Srikanth
10-11-2005 05:09 AM
none of clients?
10-13-2005 08:32 PM
Make sure the clients have the correct SSID configured which matches with the AP. Thinking, if its a typo on your side on the client.
Use Express setup and Express security to create an SSID, to which you can readily connect. Once this is done, you can go under security settings to add WEP key or radius authentication.
10-14-2005 12:37 AM
Hi,
thanks I got solution.
12-27-2005 06:14 PM
hi, how u done ur setting can u provide me a copy of ur setting
i also getting same situation but my side i can let the network scan the wireless for a moment only. later cant detect alr
12-30-2005 01:14 PM
Hi, i have the same situation where i have 3com USB wireless client (54Mbs 11g). I have configured my 1100 AP with SSID and enable broadcasting. but i can't see this wireless network.
Please help!
12-30-2005 05:52 PM
can u send me the config.
12-31-2005 01:07 AM
Here is my config:
12-31-2005 03:19 PM
Hi,
It seems these access points 1100 rn 802.11b clients only and you need to upgrade in order for 802.11g cliens associate with these Access Points. But i need to know IOS upgrade or what?
01-02-2006 05:47 PM
where is ur attachment
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide