Using Cisco 350 series equipment, you will need 12dBi (or higher) antennas at either end for a reliable link at 11Mbps, assuming no obstructions. For 1Mbps, you can use 7dBi antennas, which would be much smaller.
We can help you with the antenna selection, mounts and installation if necessary.
Your actual data throughput will be 60% of the nominal rating. or less - so the 1Mbps setting will give you up to the equivalent of 640Kbps.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...