Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IAS as RADIUS

I have a lab where Im trying to put an Microsoft IAS as RADIUS for an AIR-1130ag.

But I dont have any success.

Any ideas?.

The following output is and debug in the AP:

---------------------------------

*Mar 1 01:44:26.927: RADIUS/ENCODE(00000051):Orig. component type = DOT11

*Mar 1 01:44:26.927: RADIUS(00000051): Storing nasport 330 in rad_db

*Mar 1 01:44:26.927: RADIUS(00000051): Config NAS IP: 192.168.15.253

*Mar 1 01:44:26.931: RADIUS/ENCODE(00000051): acct_session_id: 78

*Mar 1 01:44:26.931: RADIUS(00000051): Config NAS IP: 192.168.15.253

*Mar 1 01:44:26.931: RADIUS(00000051): sending

*Mar 1 01:44:26.931: RADIUS(00000051): Send Access-Request to 192.168.15.200:1645 id 1645/22, len 166

*Mar 1 01:44:26.935: RADIUS: authenticator CF A3 C7 1E 83 0A 39 6C - 34 5C B4 DD D4 7F 7A 7C

*Mar 1 01:44:26.935: RADIUS: User-Name [1] 25 "ATRIDANETWORKS\rjimenez"

*Mar 1 01:44:26.935: RADIUS: Framed-MTU [12] 6 1400

*Mar 1 01:44:26.939: RADIUS: Called-Station-Id [30] 16 "000d.293f.da0d"

*Mar 1 01:44:26.939: RADIUS: Calling-Station-Id [31] 16 "001b.7715.6141"

*Mar 1 01:44:26.939: RADIUS: Service-Type [6] 6 Login [1]

*Mar 1 01:44:26.939: RADIUS: Message-Authenticato[80] 18 *

*Mar 1 01:44:26.939: RADIUS: EAP-Message [79] 30

*Mar 1 01:44:26.943: RADIUS: 02 02 00 1C 01 41 54 52 49 44 41 4E 45 54 57 4F [?????ATRIDANETWO]

*Mar 1 01:44:26.943: RADIUS: 52 4B 53 5C 72 6A 69 6D 65 6E 65 7A [RKS\rjimenez]

*Mar 1 01:44:26.943: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]

*Mar 1 01:44:26.947: RADIUS: NAS-Port [5] 6 330

*Mar 1 01:44:26.947: RADIUS: NAS-IP-Address [4] 6 192.168.15.253

*Mar 1 01:44:26.947: RADIUS: Nas-Identifier [32] 11 "atrida-ap"

*Mar 1 01:44:31.996: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:31.996: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:37.353: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:37.353: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:43.243: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:43.243: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:48.609: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:48.609: RADIUS: No response from (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:48.609: RADIUS/DECODE: parse response no app start; FAIL

*Mar 1 01:44:48.609: RADIUS/DECODE: parse response; FAIL

*Mar 1 01:44:48.613: %DOT11-7-AUTH_FAILED: Station 001b.7715.6141 Authentication failed

  • Other Wireless - Mobility Subjects
1 REPLY
New Member

Re: IAS as RADIUS

Has the radius server been started?

I assume the radius server is on 192.168.15.200.

The logs show no reply. So maybe the service isn't started?

320
Views
0
Helpful
1
Replies
This widget could not be displayed.