cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
653
Views
0
Helpful
1
Replies

IAS as RADIUS

Rafael Jimenez
Level 4
Level 4

I have a lab where Im trying to put an Microsoft IAS as RADIUS for an AIR-1130ag.

But I dont have any success.

Any ideas?.

The following output is and debug in the AP:

---------------------------------

*Mar 1 01:44:26.927: RADIUS/ENCODE(00000051):Orig. component type = DOT11

*Mar 1 01:44:26.927: RADIUS(00000051): Storing nasport 330 in rad_db

*Mar 1 01:44:26.927: RADIUS(00000051): Config NAS IP: 192.168.15.253

*Mar 1 01:44:26.931: RADIUS/ENCODE(00000051): acct_session_id: 78

*Mar 1 01:44:26.931: RADIUS(00000051): Config NAS IP: 192.168.15.253

*Mar 1 01:44:26.931: RADIUS(00000051): sending

*Mar 1 01:44:26.931: RADIUS(00000051): Send Access-Request to 192.168.15.200:1645 id 1645/22, len 166

*Mar 1 01:44:26.935: RADIUS: authenticator CF A3 C7 1E 83 0A 39 6C - 34 5C B4 DD D4 7F 7A 7C

*Mar 1 01:44:26.935: RADIUS: User-Name [1] 25 "ATRIDANETWORKS\rjimenez"

*Mar 1 01:44:26.935: RADIUS: Framed-MTU [12] 6 1400

*Mar 1 01:44:26.939: RADIUS: Called-Station-Id [30] 16 "000d.293f.da0d"

*Mar 1 01:44:26.939: RADIUS: Calling-Station-Id [31] 16 "001b.7715.6141"

*Mar 1 01:44:26.939: RADIUS: Service-Type [6] 6 Login [1]

*Mar 1 01:44:26.939: RADIUS: Message-Authenticato[80] 18 *

*Mar 1 01:44:26.939: RADIUS: EAP-Message [79] 30

*Mar 1 01:44:26.943: RADIUS: 02 02 00 1C 01 41 54 52 49 44 41 4E 45 54 57 4F [?????ATRIDANETWO]

*Mar 1 01:44:26.943: RADIUS: 52 4B 53 5C 72 6A 69 6D 65 6E 65 7A [RKS\rjimenez]

*Mar 1 01:44:26.943: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]

*Mar 1 01:44:26.947: RADIUS: NAS-Port [5] 6 330

*Mar 1 01:44:26.947: RADIUS: NAS-IP-Address [4] 6 192.168.15.253

*Mar 1 01:44:26.947: RADIUS: Nas-Identifier [32] 11 "atrida-ap"

*Mar 1 01:44:31.996: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:31.996: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:37.353: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:37.353: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:43.243: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:43.243: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:48.609: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000

*Mar 1 01:44:48.609: RADIUS: No response from (192.168.15.200:1645,1646) for id 1645/22

*Mar 1 01:44:48.609: RADIUS/DECODE: parse response no app start; FAIL

*Mar 1 01:44:48.609: RADIUS/DECODE: parse response; FAIL

*Mar 1 01:44:48.613: %DOT11-7-AUTH_FAILED: Station 001b.7715.6141 Authentication failed

1 Reply 1

timkaye
Level 1
Level 1

Has the radius server been started?

I assume the radius server is on 192.168.15.200.

The logs show no reply. So maybe the service isn't started?

Review Cisco Networking products for a $25 gift card