Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ICA on Wireless

I expeirience problems with a wireless link (Point to Point), while running a large amount of ICA sessions. When reaching approx 600 packets/s on the link, the radio starts throwing packets, resulting in "frozen" ICA-sessions, and users "throwed out".

When shaping the connection using a Cisco router, the problem disapears, but I have only been able to do this by bandwith, not by packets/s. As a result, the bandwith has to be shaped down to approx. 1.7 Mbit on the link...

Does anyone have a suggestion how to solve the problem, and do You have expeiriences of how many packets/s a Cisco 340 bridge should forward before throwing away packets ?

While running larger packets (ie FTP) the link is operating normal (6-7 Mbit/s)




Re: ICA on Wireless

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center ( or speak with a TAC engineer. You can open a TAC case online at

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.