Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Increase power output to 17 or 20 dBm not possible on AP 1131 AG

Hello all, hopefully someone out there can help me!

Why it's not possible to increase power output to 17 or 20 dBm on AP 1131 AG ?

(AIR-AP1131AG-E-K9) ETSI.

power local cck =

<1> One of: -1 2 5 8 11 14

maximum Set local power to allowed maximum

...but 14 dBm is only 25mW !!

Any idea ?

Hopefully, this will make sense to someone, and I will be really grateful for some clarification!

Thank you and best regards.

Seb

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hi Seb,

These restrictions are based on the Regulatory Domain (in your case "E");

This chapter lists the 1130 series autonomous access point (models: AIR-AP1131AG-x-K9 and AIR-AP1131G-x-K9) IEEE 802.11b/g (2.4-GHz) and the IEEE 802.11a (5-GHz) channels and maximum power levels supported by the world's regulatory domains.

Channels and Maximum Power Settings for Cisco Aironet Autonomous Access Points and Bridges

Cisco Aironet 1130AG Series Access Points

http://www.cisco.com/en/US/docs/wireless/access_point/channels/ios/reference/guide/1130_chp.html

Hope this helps!

Rob

5 REPLIES
Hall of Fame Super Red

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hi Seb,

These restrictions are based on the Regulatory Domain (in your case "E");

This chapter lists the 1130 series autonomous access point (models: AIR-AP1131AG-x-K9 and AIR-AP1131G-x-K9) IEEE 802.11b/g (2.4-GHz) and the IEEE 802.11a (5-GHz) channels and maximum power levels supported by the world's regulatory domains.

Channels and Maximum Power Settings for Cisco Aironet Autonomous Access Points and Bridges

Cisco Aironet 1130AG Series Access Points

http://www.cisco.com/en/US/docs/wireless/access_point/channels/ios/reference/guide/1130_chp.html

Hope this helps!

Rob

New Member

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hi Rob,

Thank you so much for this nice technical note.

Best regards,

Seb

Hall of Fame Super Red

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hey Seb,

You are most welcome my friend :) Glad to be of some small help.

Cheers!

Rob

New Member

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hi

5 from me :-). I do not know how I miss this section. Very useful.

Thx again

Cheers

Greg

Hall of Fame Super Red

Re: Increase power output to 17 or 20 dBm not possible on AP 113

Hi Greg,

You are very welcome! Thanks for your nice vote :)

Take care,

Rob

473
Views
5
Helpful
5
Replies