Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Interface Dot11Radio0, Deauthenticating Station Reason: Sending station has left the BSS

Dear сolleagues,

I have a problem with 3 AP AIR-SAP1602I-E-K9:

Interface Dot11Radio0, Deauthenticating Station xxxx.xxxx.xxxx Reason: Sending station has left the BSS

i have WPA / TKIP and i update the drivers on our laptops and i try a lot of solutions but the problem persists 

this is my configuration :

 

!
! Last configuration change at 21:22:36 UTC Wed Mar 3 1993 by Cisco
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname AP1
!
!
logging rate-limit console 9
enable secret 5 $1$MNKV$SsjzhDbJ2be4LpcUAErZD1
!
no aaa new-model
no ip routing
no ip cef
!
!
!
dot11 syslog
!
dot11 ssid FORAMAG
   vlan 1
   authentication open 
   authentication key-management wpa
   mbssid guest-mode
   infrastructure-ssid optional
   wpa-psk ascii 7 06570B25154F504F564545
!
dot11 ssid FOR_INVITE
   vlan 100
   authentication open 
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 104C001C0B0117051901
!
!
crypto pki token default removal timeout 0
!
!
username Cisco password 7 02250D480809
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption vlan 100 mode ciphers tkip 
 !
 encryption vlan 1 mode ciphers tkip 
 !
 ssid FORAMAG
 !
 ssid FOR_INVITE
 !
 countermeasure tkip hold-time 0
 antenna gain 0
 stbc
 beamform ofdm
 mbssid
 packet retries 128 drop-packet
 station-role root
 rts threshold 512
 rts retries 128
 no dot11 extension aironet
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.100
 encapsulation dot1Q 100
 no ip route-cache
 bridge-group 100
 bridge-group 100 subscriber-loop-control
 bridge-group 100 spanning-disabled
 bridge-group 100 block-unknown-source
 no bridge-group 100 source-learning
 no bridge-group 100 unicast-flooding
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 shutdown
 antenna gain 0
 no dfs band block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
!
interface GigabitEthernet0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface GigabitEthernet0.100
 encapsulation dot1Q 100
 no ip route-cache
 bridge-group 100
 bridge-group 100 spanning-disabled
 no bridge-group 100 source-learning
!
interface BVI1
 ip address 192.168.1.31 255.255.255.0
 no ip route-cache
!
ip default-gateway 192.168.1.110
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
 transport input all
!
end

 

 

 Tank you

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

I would test these clients by

I would test these clients by configuring WPA2/AES on a SSID & see if the behavior is same.

 

HTH

Rasika

**** Pls rate all useful responses ****

2 REPLIES
VIP Purple

I would test these clients by

I would test these clients by configuring WPA2/AES on a SSID & see if the behavior is same.

 

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Thank you  thats it :)

Thank you  thats it :)

538
Views
0
Helpful
2
Replies
CreatePlease login to create content