Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS command Line to show Associations

I am looking for the IOS command that shows what users laptops are using a 1240. On the web interface under asscoiation tab it shows the device type, name ip address. Is there one for IOS commmand line?

2 REPLIES
Hall of Fame Super Red

Re: IOS command Line to show Associations

Hi Lawrence,

Use the show dot11 associations privileged EXEC command to display the radio association table, radio association statistics, or to selectively display association information about all repeaters, all clients, a specific client, or basic service clients.

show dot11 associations

[client | repeater | statistics | H.H.H | bss-only | all-client | cckm-statistics]

client

(Option) Displays all client devices associated with the access point

repeater

(Option) Displays all repeater devices associated with the access point

statistics

(Option) Displays access point association statistics for the radio interface

H.H.H (mac-address)

(Option) Displays details about the client device with the specified MAC address (in xxxx.xxxx.xxxx format)

bss-only

(Option) Displays only the basic service set clients that are directly associated with the access point

all-client

(Option) Displays the status of all clients associated with the access point

cckm-statistics

(Option) Displays fast, secure roaming (CCKM) latency statistics measured at the access point for client devices using CCKM

From this doc;

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_4_JA/command/reference/cr34main.html#wpxref81339

Hope this helps!

Rob

New Member

Re: IOS command Line to show Associations

Thanks but I know and tried that command.

It is not showing the users that use the AP.

2400
Views
0
Helpful
2
Replies