IOS devices will only connect to one SSID#1 or SSID#2 but never both
Has anyone ran into an issue with IOS devices (ipod/ipad/iphone) allowing association to only one SSID (in a 2+ SSID environment configured on the WLC) but never able to connect to more than one? The only way i am able to get an alternate connection established is to reset the network settings on the IOS device. Note: one of my SSID/WLAN is pre-shared key and one is back ended by LDAP, and each can be associated to after the mandatory network settings reset.
Also, if this topic has been discussed on previous thread i'd greatly appreciate the URL. thx much
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...