IP Forwarding Agent / DHCP Client, Virtual IP Router
I have a problem with some of my clients. They have static IP's but attach to the AP350 with address 0.0.0.0 and with : "OK, WEP, IP Forwarding Agent, BOOTP/DHCP Client, IP Virtual Router." in the Status cell.
Re: IP Forwarding Agent / DHCP Client, Virtual IP Router
Can you check if you have enabled Broadcast key rotation. When you enable broadcast key rotation, only wireless client devices using LEAP or EAP-TLS authentication can use the access point. Client devices using static WEP (with open, shared key, or EAP-MD5 authentication) cannot use the access point when you enable broadcast key rotation. This may be the reason for your problem.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...