Is the 1600 AP's supported on WLC 4404 v 7.0.240?

[Jamie Hancock]

Thats the question, any ideas?

J.

[Scott Fella]

No it's not. Here is a compatibility matrix to keep handy as this shows what code and equipment are compatible.

The 1602 requires v7.4.100.0

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App

[aqjaved · Accepted solution]

No, it’s not supported with 7.0.240.0. Please check the below table

Controller Software Release	Supported Access Points
7.4.x	1522, 1524PS, 1524SB, 1552E, 1552H,   1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 1600, 2600,   3500e, 3500i, 3500p, 3600e, 3600i, 1140, 600 OEAP, AP801, AP802
7.0.2x.x	1522, 1524PS, 1524SB, 1552E, 1552H,   1552I, 1552C, 1130, 1240, 1250, 1260, 3500e, 3500i, 3500p, 1140, 600 OEAP,   AP801, AP802
4.1.190.5 (Mesh   Release 1)	1505, 1510, 1522 (US and Canada)

1600 Series	AIR-CAP1602I-x-K9	7.4.100.0	—	3.2.0SE	-
	AIR-CAP1602I-xK910	7.4.100.0	—	3.2.0SE	-
	AIR-SAP1602I-x-K9	7.4.100.0	—	3.2.0SE	-
	AIR-SAP1602I-xK9-5	7.4.100.0	—	3.2.0SE	-
	AIR-CAP1602E-x-K9	7.4.100.0	—	3.2.0SE	-
	AIR-SAP1602E-xK9-5	7.4.100.0	—	3.2.0SE	-

For compatibility Matrix, visit below link:

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

[Rasika Nayanajith]

Also note that 4400 series WLC cannot go beyond 7.0.x code. So you have to purchase a new WLC (2504/5508/etc) in order to use thise newer AP(1600/2600/3600/3700)

HTH

Rasika

**** Pls rate all useful repsonses ****

[Jamie Hancock]

Thanks for the info!

J.