Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

keep alive mgs duration of wlc and ap , minimum bandwidth requried to register ap to wlc from remotely

what is the keep alive duration between cisco 1142 ap and 5508 wlc . Can we able to increase it .

How much bandwidth minimum required to register an ap which is in remote brach .

Breeze Joseph Kuriakose Sr Network Engineer
4 REPLIES
Hall of Fame Super Silver

keep alive mgs duration of wlc and ap , minimum bandwidth requri

Here is a good link:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml

-Scott
*** Please rate helpful posts ***
Cisco Employee

Re: keep alive mgs duration of wlc and ap , minimum bandwidth re

AP heart can be configured on WLC. Wireless>> Access  Points>> Global Configuration>> High Availability>>

H REAP WAN Considerations:

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml#WAN

Cisco Employee

Re: keep alive mgs duration of wlc and ap , minimum bandwidth re

Use the E for Europe, had a few A domain aps come over from time to time and still catch me out!

Cisco Employee

Re: keep alive mgs duration of wlc and ap , minimum bandwidth re

If you want to control the heartbeat timers to be fast detect connection failure between AP and WLC, use the following command:

config advanced timers ap-fast-heartbeat {local | hreap | all} 
    {enable | disable} interval
1104
Views
0
Helpful
4
Replies