I am looking for a design guide to help me split up a large subnet for a Cisco Wireless network. We have a Campus with a centralised Wsim and a single SSID. We are hoping to be able to keep the single SSID but split the subnet as it is now quite large and we would like to reduce the broadcast domain to a manageable size. I have found a number which have different SSID but we would like to keep only 1 as it simplifies the user experience.
Well one thing to look at is using interface groups. You can break up the large subnet and instead group them all together. This feature is available starting from v7.0 which your WiSM supports. Here is more info on interface groups.
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...