10-09-2008 11:28 AM - edited 07-03-2021 04:35 PM
I have old handheld devices that are using LEAP authentication to a local radius server. They are currently connected to IOS based access points. I am trying to convert the site to controllers /lwapp, but I cannot
get LEAP to work through the controller. (All other clients/devices are working fine).
Here are the settings for my ssid/radio that the clients use for LEAP on the IOS based ap's:
ssid xxxxxx
authentication open eap eap_methods
authentication network-eap eap_methods
int ...radio0
encryption mode ciphers tkip wep128
broadcast-key change 900
------------------------
I've tried every option under the controller - wlans -> security -> layer 2, but the handhelds still don't get an IP address or connect correctly. Any ideas? Or is LEAP just not compatable with WCS?
10-13-2008 12:27 AM
Have you configured the WLC(s) as NAS on the radius server?
What kind of RADIUS server are you using?
Anything in the logs on it when it fails?
10-13-2008 03:15 AM
Hi,
I'm currently having some problems with LEAP and Intel 2200BG wifi cards. Maybe your problem only comes from your wireless NIC.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: