Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LEAP -> ACS timeouts

Got a scenario with LEAP Clients (WGB350/AP1240) connecting to AP1230's. ACS used for validation both for WDS and clients (including MAC validation).

So:

Clients authenticate to WDS (both username/password and MAC)

WDS AP authenticate to ACS

Option 27 set to 0 on ACS

dot1x reauth-period server set on AP's

broadcast-key vlan xx set on AP's

I still see a lot of trafic going to ACS but anyone have som good information about where to adjust time settings so ex. a disconnection to ACS can be acceptable for a longer period.

Thank :-)

1 REPLY
Bronze

Re: LEAP -> ACS timeouts

Set "Session idle timeout" for administrative sessions to a suitable time period.

The default for the number of minutes of inactivity within the administrative session is 60 minutes. Once this time-out has been reached, the browser terminates the remote administration connection, after which a new session would require re-authentication.

225
Views
0
Helpful
1
Replies
CreatePlease login to create content