Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lightweight AP in a different VLAN switch is not connecting with WLC

See attached file for details

  • Other Wireless - Mobility Subjects
13 REPLIES
Hall of Fame Super Silver

Re: Lightweight AP in a different VLAN switch is not connecting

Well one thing to try id you are not useing option 43 or DNS to help the LAP join the WLC is to place the AP in the VLAN 30 subnet and let the ap join. Then tag the port for vlan 50 and reboot the LAP. That should work for you unless the vlan from the switch the ap is connected to isn't forwarding to the core.

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: Lightweight AP in a different VLAN switch is not connecting

which port to tag ?

ap-manager or management interface

Hall of Fame Super Gold

Re: Lightweight AP in a different VLAN switch is not connecting

Does the AP have an IP Address? If yes, can the AP ping the management interface of the WLC? If yes, then type this command from the AP:

lwapp ap controller ip add

Hope this helps.

New Member

Re: Lightweight AP in a different VLAN switch is not connecting

When we are typing this command on AP it is showing that command is disabled, so how can we enable command writing mode in lightweight AP.

Thanks

Hall of Fame Super Gold

Re: Lightweight AP in a different VLAN switch is not connecting

The command should be enabled in priviledge mode (not in configuration/global).

Hall of Fame Super Silver

Re: Lightweight AP in a different VLAN switch is not connecting

configure a username and password from the wlc cli:

config ap username password all

config ap username password

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: Lightweight AP in a different VLAN switch is not connecting

I have joined the VLAN 50 AP to controller with this command and have connect the wireless client, but the wireless client of VLAN 50 (static IP's)not ping the gateway address i.e. 10.0.50.1, what should I do now ? whereas the wireless clients of VLAN 30 (DHCP based IP's)are working perfectly.

Thanks

Hall of Fame Super Silver

Re: Lightweight AP in a different VLAN switch is not connecting

Double check that your dhcp scope is active and that the switches are forwarding the vlan 50 to the L3 switch/router. Post your show run-config if you are still having issues.

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: Lightweight AP in a different VLAN switch is not connecting

we are typing this command in privilege mode but it is showing the error that command is disabled, so what to do?

Thanks

407
Views
0
Helpful
13
Replies
This widget could not be displayed.