Lighweight AP's routing after VPN backup failback to MPLS
I have an a WLC 4402 version 126.96.36.199 with AP's (1130's) running in local mode with a bunch of remote sites. All wireless traffic is sent through the controller at another remote site. I have MPLS with VPN failover. When it goes to VPN it works fine. When it switches back to MPLS the AP's still want to send the traffic over the VPN. All other traffic at the remote site switches back to using the MPLS. When I reboot the AP it returns to going over the MPLS. All users default gateway is MPLS.