I was wondering if there is a way to limit the number of clients to an AP? We run WLC's and a WCS. WLC version 184.108.40.206. I've read some stuff about threshold limits but nothing like "click this checkbox and enter in the max number of clients per AP" :>)
If the clients use CCX extensions you can influence them. Search in the Wireless LAN Controller Configuration Guide for "Using the GUI to Configure CCX Client Roaming Parameters" and "Using the CLI to Configure Aggressive Load Balancing".
(WLC) >config load-balancing win ndow ?
Number of clients (0 to 20)
5 In the Scan Threshold field, enter the minimum RSSI that is allowed before the client should roam to a
better access point. When the RSSI drops below the specified value, the client must be able to roam to a
better access point within the specified transition time. This parameter also provides a power-save
method to minimize the time that the client spends in active or passive scanning. For example, the client
can scan slowly when the RSSI is above the threshold and scan more rapidly when below the threshold.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...