Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Load Balance guest Internet access via two different DMZ zones at two sites

Hi Sir,

My customer has the following unified wireless guest access requirement:

- There are 2 internet links and dmz zones at two different locations, Site A and Site B

- Data centre is at Site A

- WiSM is proposed to be installed at the Cat 6500 in Site A

- Lightweight AP are distributed across Site A, Site B and other branches

- Only one anchor WLC is proposed at Site A, DMZ zone to provide guest internet access

My customer would like to load balance the guest via the two internet link at Site A and Site B but with the same SSID across all locations. Can it be done since only one anchor at Site A? How about puttting another anchor WLC at Site B, DMZ zone? But how can i establish two EoIP tunnel to two different anchor WLC from a single WiSM?

Thanks for your help

Delon

1 REPLY
Hall of Fame Super Silver

Re: Load Balance guest Internet access via two different DMZ zon

You can... but you can't control where the traffic will flow. The wlc will determine which DMZ wlc it will use. The wlc will load balance, but traffic in site A might go to site B. I currently have deployed that senerio in multiple client installations....

-Scott
*** Please rate helpful posts ***
126
Views
0
Helpful
1
Replies