Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

loading access point image

I'm trying to set a new IOS to boot on my access point.

Could someone please tell me why I continue to get the following error?

such file or directory

Error loading "flash:/ap3g1-k9w7-tar.152-4.JA1"

ap: dir flash

unable to stat flash/: permission denied

ap: dir flash:

Directory of flash:/

2    -rwx  0         <date>               config.txt

3    -rwx  99366     <date>               event.log

4    -rwx  5144      <date>               private-multiple-fs

5    drwx  640       <date>               ap3g1-k9w8-mx.124-23c.JA2

40   -rwx  210       <date>               env_vars

41   -rwx  64        <date>               sensord_CSPRNG1

42   -rwx  64        <date>               sensord_CSPRNG0

44   drwx  1088      <date>               ap3g1-k9w7-mx.152-4.JA1

11   drwx  128       <date>               ap3g1-rcvk9w8-mx

10224640 bytes available (21515264 bytes used)

ap: set BOOT flash:/ap3g1-k9w7-tar.152-4.JA1

ap: boot

Loading "flash:/ap3g1-k9w7-tar.152-4.JA1"...flash:/ap3g1-k9w7-tar.152-4.JA1: no                      

such file or directory

Error loading "flash:/ap3g1-k9w7-tar.152-4.JA1"

Interrupt within 5 seconds to abort boot process.

Boot process terminated.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: loading access point image

1 REPLY
VIP Purple

Re: loading access point image

183
Views
0
Helpful
1
Replies