I have problem with access point air-lap1242ag-a-k9 work with lan controller air-wlc2106-k9.
the connection works well during a time but soon it is lost during few minutes and soon it raises automatic, this process repeats the day throughout. I have seen that valor AP ID in the LAN controller changes when this happens.
So are you saying that the AP disapears from the controller for a little while, then comes back?
Are the APs in the same subnet as the management/ AP manager interfaces? I would do a debug lwapp events enable and check how many broadcast sources you have in this subnet. It happens that when there are too many sources of broadcast, APs get disconnected; isolating the APs in another subnet/VLAN usually solves the issue.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...