I have to install Aironet 350 wireless bridge, but the distance between anteena and bridge will be more then 75metre (due to some LOS issues at site) so how can I have low loss cable of 75m when from Cisco, maximum 150ft cable is available??
I have found an excellent source of custom and pre-made cables from Fleeman Anderson & Bird Corp http://www.fab-corp.com/ I have dealt with them on numerous occasions with excellent results and quick turn around. They will even make custom cables with the required RP\TNC connectors on them eliminating losses associated with multiple adaptors.
Note to anyone checking out their site they do offer several amplifiers for the 2.4 & 5.8 Ghz bands. Please consult a knowledgeable engineer before attempting to extend your range in this fashion and always use good grounding practices.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...